[André Sena]

Nikon D6: atualização de firmware

Versão 1.20
Download:
https://downloadcenter.nikonimglib.com/en/download/fw/396.html


A Recall shooting functions (hold) item has been added to Custom Setting f3 Custom controls. Assigning this role to a control lets you recall previously-saved values for settings such as exposure and metering by pressing the control once during viewfinder photography. The previous values can be restored by pressing the control a second time. Recall shooting functions (hold) can be assigned to the Preview button, Fn1 button, Fn2 button, Fn button for vertical shooting, AF-ON button, Sub-selector center, AF-ON button for vertical shooting, Movie record button, or Lens focus function buttons.

A new option, Prefer sub-selector center, has been added to the Custom Settings menu at position f13. Although at default settings the sub-selector cannot be used to position the focus point while the center is pressed, selecting Off for Prefer sub-selector center lets you hold the center and still position the focus point by pressing the sub-selector up, down, left, or right. You can, for example, assign AF-area mode to the center of the sub-selector and then use the sub-selector to position the focus point while the center still serves in the AF-area mode role.

A Focus point selection speed item has been added to Custom Setting a17 Focus point options. The speed at which the focus points for viewfinder photography can be cycled by holding the sub-selector or keeping the multi selector pressed up, down, left, or right can be chosen from Normal, High, and Extra high.

Ratings are now displayed at all times during playback zoom, even when None (image only) is selected for playback display options.

The camera can now more reliably focus on poorly-lit low-contrast subjects when dynamic-area AF is selected for AF-area mode.

[André Sena]

Nikon D6: atualização de firmware


Versão 1.30
Data 15/06/2021


• A new option, Keep exp. when f/ changes, has been added to the Custom Settings menu at position b8. When Off is selected for ISO sensitivity settings > Auto ISO sensitivity control in the photo shooting menu in mode M, actions such as switching to a lens with a different aperture range may cause unintended changes to aperture. If an option other than Off is selected for Keep exp. when f/ changes, the camera will adjust shutter speed or ISO sensitivity to maintain exposure at its current value.

Other actions to which automatic exposure maintenance applies include:
- adjusting zoom on lenses that have different values for maximum aperture at maximum and minimum zoom,
- attaching a teleconverter, and
- changing the focus distance when a micro lens is attached.
• Changes have been made to improve the reliability of the autofocus operation.

Download:
https://downloadcenter.nikonimglib.com/en/download/fw/410.html

[André Sena]

Versão 1.31
Data 06/07/2021

• Fixed the following issues:
- Waking the camera by pressing a control such as the AF-ON button after the standby timer had expired would in very rare instances cause camera settings to change or shooting would to start without the shutter-release button being pressed.
- The shutter release would in very rare instances stop responding after a burst of photographs in continuous release mode or after an uninterrupted series of photographs taken in quick succession in single-frame release mode.

Download:
https://downloadcenter.nikonimglib.com/en/download/fw/412.html

[André Sena]

versão 1.32
24/08/2021

Fixed an issue that in very rare instances resulted in the shutter not being released when the shutter-release button was pressed during consecutive shots of a portrait subject.

download:
https://downloadcenter.nikonimglib.com/en/download/fw/416.html

[André Sena]

versão 1.33
28/09/2021

Fixed an issue that would in very rare instances result in a burst of two photos being taken with a single press of the shutter-release button when Single frame was selected for release mode.

download:
https://downloadcenter.nikonimglib.com/en/download/fw/419.html

[André Sena]

versão 1.4
16/12/2021

https://downloadcenter.nikonimglib.com/en/download/fw/433.html

• Added a Select all to send (wired LAN/WT) item to the playback “i” menu that can be used to mark for upload all pictures that meet the criteria currently selected for filtered playback.
• Changes have been made to the buttons used to mark pictures for upload when the camera is connected to a computer or FTP server:
- Pictures can now be marked for priority upload by holding the OK button and pressing the multi selector left.
- Holding the OK button and pressing the center of the multi selector now marks pictures for non-priority upload.
• Fixed the following issues:
- Auto white balance would not perform as expected if (a) white balance was not among the settings recalled via Custom Setting f3 (Custom controls) > Recall shooting functions or Recall shooting functions (hold) in the CUSTOM SETTING MENU or (b) a Recall shooting functions or Recall shooting functions (hold) operation was performed while exposure and white balance were locked using a control assigned AE/AWB lock (hold) via Custom Setting f3 (Custom controls) in the CUSTOM SETTING MENU.
- Aperture would be reset when the preview button was pressed to zoom in on the live view display at maximum aperture.

[André Sena]

versão 1.5
14/06/2022

https://downloadcenter.nikonimglib.com/en/download/fw/452.html

Changes from “C” Firmware Version 1.40 to 1.50

- A [USB] item has been added to the setup menu. For more information, see the Supplementary Firmware Update Manual.
- When assigned to a control using Custom Setting f3 [Custom controls] in the [CUSTOM SETTING MENU], [Recall shooting functions] can now be used while the camera is connected via USB to a device running an app such as NX Tether or NX MobileAir.